Wall covering

Facing the walls is done in several well-known ways: vzadezhku, "the seam in the seam" or on the diagonal.

As it is known, special relief glazed tiles are used for seamless cladding, because the quality of the surface lined with such tiles is quite high.

The surface of the wall, as a rule, is divided into several components: it is a plinth, then follows the base, then the main plane of the wall, then the frieze, and also the eaves. When facing various vertical surfaces, absolutely all these elements, and also internal, external corners, as well as various built-in parts (such as pipes, shelves, ceramic niches) are certainly taken into account, there are tiles of special configuration for processing each of them. The plinth and the eaves are usually veneered with shaped tiles (either special eaves or plinths that have a rectangular shape), the frieze is tiled with tiles that differ significantly from the main plane tiles in color or pattern, usually angular tiles are chosen for the corners, which are used to give a rounded forms to internal and external corners, special tiles are used for the basement,namely, tiles with a blockage (the blockage is on one side or on several sides at once).

In order for your lining to be smooth, you need to check the verticality of the room walls in front of it. This can be done with a plumb line. If you have an uneven surface, then it must additionally be leveled with mortar, and then on a flat base, then reinforce the tile-beacons: the first tile should be installed at the top of the lining, and the second one should be lowered one or two rows higher than the floor level. In order for your lighthouse tiles to be laid as evenly as possible, it is necessary to mark strictly horizontal and then vertical lines of all the first rows using a plumb line, and also cords: put pins into the base on which to lay horizontal and vertical (to make it Need at the level of the second row of your tiles) cords. Both of these cords should create an angle at which you lay the bottom lighthouse tile.

It is necessary to begin facing with laying one or two lighthouse (namely, lower) rows of tiles. Behind this, the lower beacons you have to remove, and check the horizontal rows on the already prepared facing of the lower rows.

Related news

Wall covering image, picture, imagery

Wall covering 85

Wall covering 25

Wall covering 54

Wall covering 39

Wall covering 74

Wall covering 50