The fence between adjacent areas should not cast a shadow and interfere with natural ventilation. Both parties are interested in fulfilling such regulatory requirements, because such fences can be put on fractional terms. By the way, you can select the chain link on the website http://www.temirkarkas.kz/. There are a couple of options, but the easiest to use and affordable in our store is a fence from a chain-link mesh.
The fence between adjacent areas should not cast a shadow and interfere with natural ventilation. Both parties are interested in fulfilling such regulatory requirements, because such fences can be put on fractional terms. There are a couple of options, but the easiest to use and affordable in our store is a fence from a chain-link mesh.
WHAT A Ryabichny grid To get FOR THE FENCE
The cost of the grid depends on the width of the roll, the thickness of the wire and the size of the cell. The larger the first two parameters and the smaller the second, the greater the weight of the metal, which means the greater the cost of the roll. Also, the price is affected by the presence and type of coating with a protective effect.
The width of the grid - this will be the height of the fence plus about 5-10 cm (from the bottom edge to the surface of the earth). Even with a roll width of 1.8 m, the barrier will be larger than the average human height. In most cases, the selection is stopped on a 1.2 m or 1.5 m wide grid.
The thickness of the wire starts from 1 mm. However, this grid has small strength characteristics, thanks to which it is more often selected a grid with a thickness of 2-3 mm. It should be borne in mind that if it contains a coating on a polymer base, then the real diameter of the metal will be at least 0.4–0.5 mm smaller, and in many cases the difference will be about 1 mm.
The cell size can be from 10 mm (however this is for fine wires) to 100 mm. The most demanded cell 50x50 mm (and again because of the price). For example, a grid with a similar cell and a thickness of 2.5 mm will be 20% more accessible than with a cell of 25x25 mm and a thickness of 1.6 mm (with the same width).
And a very important question - WITH WHAT COVER TO Purchase a Ryabichny grid.
It is not worth purchasing a “black” grid for a permanent fence. It will serve less, although in 2-3 years it will not crumble from corrosive destruction, as some authors write. But the main, ugly look of a rusty fence. The only justified use in living conditions is a short-term fence.For example, for a certain period of time construction. Inking chermet non-profit occupation - the price of a good paint for external work is large. And taking into account that some of the paint is spilled, not all parts of the cells will be painted and rust will still “arise”, it is best to immediately pick up a grid with anti-corrosion treatment.
Galvanized mesh is a great choice. The price of such coverage will be higher, but not very much - no more than 30% of the price of the raw grid. But the operational period will be at least 15 years (depending on the ecology of the region).
The coated rabbit on the basis of polymers has its own specifics. It's not even the type of polymer material (in contrast to the profiled flooring, PVC is used in most cases), but the basis on which it is applied. On the market there are offers with coating for non-galvanized metal. Immediately, you need to declare that the properties of the protection of the polymer material are low in themselves - for some time, under the influence of sunlight and temperature differences, it begins to deteriorate (plus rust of unfinished metal inside).Such a coating most likely will not withstand 5–6 years of operation, and the durability grid hardly stands out from the “black” one, although its price is 1.5 times higher. If you select for decorative reasons, "color" sabbath, then a great option to polymer material deposited on galvanized wire. However, you will have to pay for this, although less than one and a half prices from “plain” zinc-coated steel.