Installation of plasterboard ceiling on the balcony
One of the most modern options for finishing the ceiling is sheeting plasterboard. This process can be done even by a beginning master, so if you decide to repair your balcony yourself, then you can begin to finish his plasterboard without hesitation. In addition to the fact that there is no difficulty with the plating process, this material is rather light, and even if you have no assistants, you can easily cope with the task alone.
But this is not all the advantages of GCR. To order a similar interior design is inexpensive and quite affordable, as the material is quite budget, and also allows you to bring to life any design ideas of any level of creativity. Due to its solid structure, it can be used practically without any special preparation of the working surface. In other words, if you don’t really want to mess around with cleaning the ceiling from the previous coating, then you don’t need to.The only exception is plastic, it will have to be removed. But if it is not possible to do this completely, then it is not necessary to be upset, small balances will not interfere.
When works on cleaning and warming the foundations are done, the bars (or boards, depending on the height to the ceiling base) are nailed around the perimeter of the room, according to the marks made on the walls. Then from corner to corner it is necessary to stretch the cord, which will become a guide for fixing the remaining bars. The distance between them should be less than 50 cm. This is due to the fact that the width of the sheet reaches almost 120 centimeters.