How to make an electric guitar?

Make a musical instrument with your own hands -a case requiring patience and the availability of certain materials. But, if you know how to make an electric guitar - the material costs in this case will be much smaller than when buying an electric guitar, for example, in a store. A good tool can be bought for little money, an alternative is to make a tool for the soul.

Material for Guitar

Selecting the material from which the guitar will be made- a matter of prime importance. Not all tree species are suitable for this purpose. It is better to choose pine. Why pine, but not oak, for example? In order to make a quality instrument with sound sound, from the oak, you will need to listen and go over a few hundred boards. Here you need the experience of a professional. In how to make an electric guitar with your own hands - it's best not to use an oak.

So, choose the board. You need to look at how the fibers are distributed. The more symmetry, the better. The color of the board should be as light as possible. Of several samples of pine boards, you need to take the lightest shade, then the properties of the material will match the purpose. The dark-colored board is made of wood core, and is not suitable for making a musical instrument. The selected board should be auditioned. To do this, tap the surface with your fingers and determine the quality of the sound produced. If you like the sound, then the material for the guitar is selected.

Next, you need the following tools:

  • hacksaw,
  • plane,
  • jigsaw hand tools,
  • scraping, sorchebel,
  • Phillips screwdrivers,
  • large-sized carpenter's vise,
  • knives, pliers,
  • nippers, files,
  • electric drill,
  • compressor spray gun,
  • eccentric grinding machine,
  • Drills to a drill for metal - 2, 3, 6, 9 mm, and on wood - 12, 19, 22, 26 mm.

To the jigsaw must be attached a file with a widecanvas for direct sawing and with a 4-mm narrow blade for figured wood cutting. For the router, 2 straight cutters 12.7 mm and 6 mm are needed. The ribbon grinding machine will need ribbons for coarse grinding (from P-36, P-40, P-80, P-100), as well as for fine, cosmetic polishing (from P-100 and above).

Features of manufacturing

If everything is available, you can proceedhow to make an electric guitar from an existing material. We take stratovy machine, a single in NEK, humbucker in bridge. The griffon will be made of ash, with an anchor bookmarked on the back side, and without a lining. We begin to make the body of a guitar. An indispensable condition for the manufacture of a good body is the absence on the glued surface of two boards of irregularities, notches and knots. To achieve this, you need to put the boards one on top of the other in a pile, clamp them with a vice and process both surfaces for gluing as one, using a grinder or a plane. Then the boards are pulled out from the vise, after careful fitting they are glued together. The process of gluing is laborious, but it is necessary to do everything carefully.

After the glued board has dried, use a pencilDraw a contour - the shape of the future guitar, on this contour there will be sawing with a jig saw. It is necessary to accurately and accurately make the layout, think through all the lines of the body bends, so that the shape cut from the workpiece should be as accurate as possible. Then, using a ruler, markup is made for the neck. You can use the ready-made bar, then the groove for it is simple enough. The main thing in methods like making an electric guitar with your own hands is that the size of the neck, its thickness and other parameters you need to know before cutting out the case.

If the neck is made by yourself, you needtake two boards of ash and one of pine. This will be the head, which is done by the floor slope of 16-18 degrees. After careful thinking through the parameters, marking is done, then sawing and gluing. In order to achieve high-quality gluing, you need to use a vice.

When the bar stock dried, an anchorkernel. For this, a rod with threaded ends, washers and nuts is used. To make a groove for the rod, a router with an installed guide is used, with a groove cutter 6 or 8 mm. This is necessary for greater equality. After this, the workpiece is lined up to the upper threshold by the marking of the electric jigsaw. Next, you need to cut out your head and drill holes for the pegs. The head is glued to the neck and clamped with a vice until it dries.

The final stage of the work is how to makeelectric guitar - hide the anchor rod. It is necessary to prepare a homogeneous adhesive mass from sawdust and PVA and fill it with a groove with a rod, having preliminary checked the tightening of the nuts on the thread. Everything should dry well. Next, finishing varnishes and paints are used.

Related news

How to make an electric guitar

How to make an electric guitar

How to make an electric guitar

How to make an electric guitar

How to make an electric guitar

How to make an electric guitar

How to make an electric guitar

How to make an electric guitar

How to make an electric guitar

How to make an electric guitar

How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar How to make an electric guitar