How to connect the router to the modem?
Many users of personal computersthink how to connect the router through the modem. There are several different connections to the DSL network. And some of them are calculated for the simultaneous use of several devices at once.
So, before you connect the router to ADSLmodem, you must connect the modem to the telephone line using the DSL connector. This connection is best done through a splitter. This will ensure the best quality of signal transmission. The network cable should be connected to the Ethernet port of the modem, and its second end should be connected to a stationary computer or laptop. After that you need to enable it. When the computer boots, open the web browser and go to the modem settings interface. In this case, you only need to configure one item - WAN. You must select the type of data transfer and enter additional parameters: password, access point, and user name. After this, you must enable the NAT function and disable the DHCP function. All this will create a static IP address for the Wi-Fi router. Now save the settings and reboot the ADSL modem.
Connect the router
Connecting a Wi-Fi router to the modem is quite simple,just a few simple steps. It is necessary to disconnect the network cable from the computer and connect it to the Internet port of the Wi-Fi router. Use a different network cable to connect the LAN port to the computer and open the wireless settings menu. Here you will need to go to the WAN menu, where you must specify the IP address of the ADSL modem as an access point. Next, you need to change the Static IP, the type of data transfer protocol, and enable the DHCP function, which avoids the additional configuration of laptops and personal computers. Then enter the value of the IP address of the Wi-Fi router. And it should be different from the address of the ADSL modem only in the last segment. After that, you need to save the WAN menu settings. At the end of the answer to the question of how to connect the router to the modem, there are several other features to mention. You must open the Wireless Setup menu and configure the wireless access point. Do not forget about choosing the highest quality type of security. Now you need to save the wireless network settings, and then restart the Wi-Fi router. You need to make sure that the device has access to the Internet. After that, you can connect mobile computers to the wireless access point. You should connect the fixed computers to the router's LAN ports.
How to connect the USB modem to the router
Unfortunately, the USB extension cable often loses the signalfrom the modem. And the longer the wire, the worse the connection. How to fix this situation? And the router will help here. It broadcasts via wireless Wi-Fi wireless Internet connection without losing speed and power. And besides, he is able to distribute the Internet simultaneously to several users. And so, we'll figure out how to connect the 3G modem to the router. This applies only to those routers that have USB connectors or a SIM card slot. In order for the router to work consistently with the modem, it is necessary to configure it correctly. Detailed installation instructions are given in the instructions and depend on the selected router model. However, there is one detail that manufacturers often do not specify in the instructions. The fact is that the modem may not work if you do not check the RAS in the connection type and remove it in the NDIS item. These settings should be made in the modem before connecting to the router. After that, you need to insert the modem into the router and start its configuration according to the instructions.